Boom Lift License Vaughan

Boom Lift License Vaughan - Just fully qualified individuals should operate an aerial boom lift. Qualification could be attained through a combination of classroom sessions and practical training with the specific kind of aerial lift that will be used on the job. A License is needed for anybody who operates or works on an aerial boom lift.

Vehicle-mounted aerial devices include the following work vehicles: aerial ladders, extensible boom platforms, vertical towers, articulating boom platforms, and any combination of these types.

There are some basic safety regulations which apply to all boom lifts. Worker safety whilst in the basket is a main concern. Workers should wear a body harness and lanyard attached to the basket or boom. Never tie off to an equipment, an adjacent pole or a structure. Workers should stand on the floor of the basket, and never sit or climb on the basket edge. The load restrictions of the manufacturer should be followed.

Aerial lift operators must be authorized to use the machinery. The operator should know all the aspects of the device and must have access to the manufacturers manual that should be kept inside the lift. Operators are responsible for ensuring that safety procedures are followed in operating the lift. Testing lift controls everyday should be carried out. Set brakes and position outriggers (if they are used) on a stable surface or on pads. When working on a slope, utilize wheel chocks.

Never move an aerial lift truck with an elevated boom while personnel are in the basket. Extensible boom platforms and articulating boom used as employees carriers should have accessible, plainly marked, upper controls. Except for in emergency circumstances, lower controls should not be utilized to override upper controls unless the person within the lift gives authorization.

While working from an aerial lift, do not wear pole or tree climbers.
Do not alter the insulated part of the aerial lift.
Make certain that the booms are thoroughly checked, that the machine is properly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, make certain that the lines are di-electrically tested according to local regulations.

Click to Download the pdf