Forklift Training Programs Vaughan

Forklift Training Programs Vaughan - If you are looking for work as an operator of a forklift, our regulatory-compliant lift truck training programs provide exceptional instruction in many styles and types of forklifts, lessons on pre-shift check, fuel kinds and dealing with fuels, and safe operation of a forklift. Hands-on, practical training helps those participating in obtaining fundamental operational skills. Program content covers existing regulations governing the utilization of forklifts. Our proven forklift courses are meant to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Safely Handle Loads

While the forklift is in use, do not raise or lower the forks. Loads must not extend higher than the backrest. This is due to the possibility of the load sliding back in the direction of the operator. Inspect for overhead obstructions and ensure there is adequate clearance prior to lifting a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

The lift truck is less stable if a load is in a raised position. Ensure that no body ever walks below the elevated fork. The operator must never leave the forklift while the load is lifted.

While handling pallets, forks should be level and high enough to go into the pallet and extend all the way under the load. The width of the forks should provide equal weight distribution.

Before loading or unloading the truck, set the brakes and chock the wheels. Floors need to be strong enough to support the weight of the forklift and the load combined. Fixed jacks could be installed to be able to support a semi-trailer which is not coupled to a tractor. The entrance door height must clear the forklift height by a minimum of 5 cm. Mark edges of docks, rail cars or ramps and avoid them.

Do not stay in a forklift for a long time without proper ventilation. The inside of the truck should be properly lighted and free of trash, loose objects and obstructions. Inspect for holes in the floor. The installation of nonslip material on the floor would help prevent slipping. Clear whichever obstacles from docks and dockplates and ensure surfaces are not oily or wet.

Forklifts must not be used to tow or push other forklifts.

Click to Download the pdf